Main > Mounts: Trucks, Tank, Vessel
| Stabiflex Beam Mount Assembly |
| Scaime Model F60X single ended beam will mount in this assembly. Includes top and bottom mounting plates. Electrical ground strap connects the top and bottom plate. Overload stops for downward and upward forces. Ball and cup design limits side load and is self centering. Stainless steel. Add load cell from Beam section. |
| Stabiflex 500 |
557 |
500 kg |
|
$286.00 |
| Stabiflex 2T |
558 |
2 t |
|
$348.00 |
| Stabiflex 5T |
559 |
5 t |
|
$563.00 |
|
|
|
| 5103 beam only |
| 3 mv/v, 0.03% nonlinearity, 700/700 ohm, 30 ft 4 cond cable, nickel plated steel. NTEP 86-039P IIIL M 10,000 div (B10) |
| 5103-B10-5K-30P1 |
595 |
5000 lb |
|
$655.00 |
|
|
|
| 5103 with EZ Mount I |
| 3 mv/v, 0.03% nonlinearity, 700/700 ohm, 30 ft 4 cond cable, nickel plated steel, epoxy painted mount. NTEP 86-039 IIIL M 10,000 div (B10) |
| 5103-B10-5K w/EZMI |
598 |
5000lb |
|
$925.00 |
|
|
|
| 5223 Beam only |
| Replacement for Thurman TSC800 load cells, Unibridge DL9000, Airway AW901, NV-Tech BLC-2. 3 mv/v, 0.03% nonlinearity, 700/700 ohm, 40 ft 4 cond cable, hermetically sealed, nickel plated steel. NTEP 86-038 M IIIL 10,000 div. |
| 5223-B10-50K-40PI |
629 |
50000 lb |
|
$850.00 |
|
|
|
| 5223 w/ EZ Mount II |
| 3 mv/v, 0.03% nonlinearity, 700/700 ohm, 40 ft 4 cond cable, hermetically sealed, nickel plated steel. NTEP 86-038 M IIIL 10,000 div. |
| 5223-50K w/EZMII |
628 |
50000 lb |
|
$1525.00 |
|
|
|
| 65016 beam only |
| 3 mv/v, 0.05% nonlinearity, 700 ohms, 25 ft 4 cond cable, nickel plated steel, IP67. |
| 65016-1K |
584 |
1000 lb |
|
$550.00 |
|
|
|
| 65016 with tank weighing assembly |
| Covers over gauged area re epoxied in place. 3 mv/v, 0.05% nonlinearity, 700 ohms, 25 ft 4 cond cable. Load cell is nickel plated steel. Mount is cast ductile iron with baked on aluminized coating, IP67. |
| 65016-1K w/1605 |
583 |
1000 lb |
|
$700.00 |
|
|
|
| 65016-SS |
| Welded covers over gauged area. 3 mv/v, 0.05% nonlinearity, 700 ohms, 25 ft 4 cond cable. Load cell is stainless steel. Mount is cast stainless steel, IP67. |
| 65016-1K w/ 1605-SS |
580 |
1000 lb |
|
$1075.00 |
|
|
|
| 65016W-SS beam only |
| 3 mv/v, 0.05% nonlinearity, 700 ohms, 25 ft 4 cond cable, stainless steel, IP67. |
| 65016-1K-0104W-SS |
581 |
1000 lb |
|
$595.00 |
|
|
|
| 65016WH-SS beam only |
| Welded hermetically sealed. 3 mv/v, 0.05% nonlinearity, 700 ohms, 25 ft 4 cond cable, stainless steel, IP68. |
| 65016-1K-0104WH-SS |
604 |
1000 lb |
|
$695.00 |
|
|
|
| 65040 |
| Replacement for CMI Truck Scale load cells and Thurman TSC840 load cells. 3 mv/v, 0.05% nonlinearity, 700/700 ohms, 35 ft 4 cond cable, nickel plated steel, IP67. NTEP 86-045 M IIIL 10,000 div. |
| 65040A-25K |
625 |
25000 lb |
|
$700.00 |
|
|
|
| 65040-SS |
| Replacement for CMI Truck Scale load cells. Interchangeable with NV-Tech BLC-1 load cell. 3 mv/v, 0.05% nonlinearity, 700/700 ohms, 35 ft 4 cond cable, stainless steel, IP67. NTEP 86-045 M IIIL 10,000 div. |
| 65040S-25K-SS |
626 |
25000 lb |
|
$765.00 |
|
|
|
| 65058 Beam only |
| 3 mv/v, 0.05% nonlinearity, 700 ohms, 35 ft 4 cond cable, nickel plated steel, IP67. NTEP 20,000 lb thru 125,000 lb. NTEP 86-046 M IIIL 10,000 div. |
| 65058-10K |
621 |
10000 lb |
|
$635.00 |
|
|
|
| 65058 SS Beam only |
| 3 mv/v, 0.05% nonlinearity, 700 ohms, 25 ft 4 cond cable, stainless steel. w/welded gauge cover caps, IP67. NTEP 20,000 lb thru 125,000 lb. NTEP 86-046 M IIIL 10,000 div. |
| 65058-10K-SS |
619 |
10000 lb |
|
$765.00 |
|
|
|
| 65058 TSA Truck Scale Corner Assembly |
| 3 mv/v, 0.05% nonlinearity, 700 ohms, 35 ft 4 cond cablt, IP67. NTEP 20,000 lb thru 75,000 lb. NTEP 86-046 M IIIL 10,000 div. |
| 65058-10K w/TSA |
620 |
10000 lb |
|
$1175.00 |
|
|
|
| 65059 TWA Tank Weighing Assembly |
| Eliminates check rods, provides shock absorption for high impact loads. 3 mv/v, 0.1% accuracy, 350 ohms, 20ft 4 cond cable, nickel plated steel load cell, zinc plated steel mount, neoprene shock mount, IP67. |
| 65059-50 w/TWA |
565 |
50 lb |
|
$395.00 |
| 65059-75 w/TWA |
700 |
75 lb |
|
$395.00 |
| 65059-100 w/TWA |
701 |
100 lb |
|
$395.00 |
| 65059-150 w/TWA |
702 |
150 lb |
|
$395.00 |
| 65059-250 w/TWA |
703 |
250 lb |
|
$395.00 |
| 65059-2K w/TWA |
707 |
2000 lb |
|
$525.00 |
| 65059-1.5K w/TWA |
706 |
1500 lb |
|
$525.00 |
| 65059-1K w/TWA |
705 |
1000 lb |
|
$525.00 |
| 65059-500 w/TWA |
704 |
500 lb |
|
$525.00 |
| 65059-2.5K w/TWA |
708 |
2500 lb |
|
$525.00 |
|
|
|
| 65059 TWA Tank Weighing Assembly SS |
| Eliminates check rods, provides shock absorption for high impact loads. 3 mv/v, 0.1% accuracy, 350 ohms, 20ft 4 cond cable, Stainless steel load cell, Stainless steel mount, neoprene shock mount, IP67. |
| 65059-500 w/TWA SS |
722 |
500 lb |
|
$610.00 |
| 65059-1K w/TWA SS |
723 |
1000 lb |
|
$610.00 |
| 65059-1.5K w/TWA SS |
724 |
1500 lb |
|
$610.00 |
| 65059-2K w/TWA SS |
725 |
2000 lb |
|
$610.00 |
| 65059-2.5K w/TWA SS |
726 |
2500 lb |
|
$610.00 |
|
|
|
| 65061 beam only |
| Interchangeable with Fairbanks Rodan Truck scale load cells. Load cell does not have a load button. It must be ordered seperately or the existing button may be used. 3 mv/v, 0.03% nonlinearity, 700/700 ohm, 35 ft cable, nickel plated steel, IP67. NTEP 87-053 M IIIL 10,000 div. |
| 65061A-40K |
605 |
40000 lb |
|
$1330.00 |
|
|
|
| 65069 Tank Weighing Assembly |
| This tank mount assembly uses a 65058 beam load cell. 3 mv/v, 0.05% nonlinearity, 700/700 ohms, 25 ft 4 cond cable, nickel plated steel load cell and ductile iron mount, IP67. NTEP 86-046 M III 5,000 div / IIIL 10,000 div. |
| 65069-20K tank assy |
567 |
20000 lb |
|
$850.00 |
| 65069-25k tank assy |
767 |
25000 LB |
|
$850.00 |
| 65069-40K tank assy |
768 |
40000 lb |
|
$1435.00 |
| 65069-50K tank assy |
769 |
50000 lb |
|
$1830.00 |
| 65069-60K tank assy |
770 |
60000 lb |
|
$1830.00 |
|
|
|
| 65092 tank weighing assembly |
| Canister load cell and mount. Self checking with provisions for thermal expansion and contractioni. No check rod required. Monolithic element design. 2 mv/v, 0.07% nonlinearity, 450/350 ohms, 25 ft 4 cond cable, load cell is nickel plated steel, mount is zinc plated steel, IP67. |
| 65092-50K |
561 |
50000 lb |
|
$1525.00 |
| 65092-100K |
678 |
100000 lb |
|
$2595.00 |
| 65092-200K |
679 |
200000 lb |
|
$4025.00 |
| 65092-300K |
680 |
300000 lb |
|
$4650.00 |
| 65092-500K |
681 |
500000 lb |
|
$5295.00 |
| 65092-750K |
682 |
750000 lb |
|
$15395.00 |
| 65092-1000K |
683 |
1000000 lb |
|
$15395.00 |
|
|
|
| 65094 canister load cell only |
| 2 mv/v, 0.07% nonlinearity, 450/350 ohms, 25 ft 4 cond cable, nickel plated steel, IP67. |
| 65094-50K |
562 |
50000 lb |
|
$795.00 |
| 65094-100K |
684 |
100000 lb |
|
$895.00 |
| 65094-200K |
685 |
200000 lb |
|
$1695.00 |
| 65094-300K |
686 |
300000 lb |
|
$1795.00 |
| 65094-500K |
687 |
500000 lb |
|
$2419.00 |
| 65094-750K |
688 |
750000 lb |
|
$7819.00 |
| 65094-10000K |
689 |
1000000 lb |
|
$7819.00 |
|
|
|
| 80210 |
| Interchangeable with RTI Model 5223. 3 mv/v, 0.03% nonlinearity, 700/700 ohm, 60 ft 4 cond cable, nickel plated steel w/welded covers, IP67. NTEP 90-083 M IIIL 10,000 div. |
| 80210-50K |
611 |
50000 lb |
|
$825.00 |
| 80210-65K |
612 |
65000 lb |
|
$825.00 |
|
|
|
| 80310 |
| Replacement for CMI Truck Scale load cells. Interchangeable with Sensortronics 65040. 3 mv/v, 0.03% nonlinearity, 700/700 ohms, 60ft 4 cond cable, nicket plated steel, IP67. NTEP 90-083 M IIIL 10,000 div. |
| 80310-50K |
608 |
50000 lb |
|
$725.00 |
| 80310-50K-SE |
609 |
50000 lb |
|
$725.00 |
| 80310-60K |
610 |
60000 lb |
|
$825.00 |
|
|
|
| 9103 beam only |
| 3 mv/v, 0.01% combined, 860/700 ohm, 10 ft 4 cond cable 5K-20K, 30 ft 4 cond cable 30K-60K, stainless steel. NTEP 99-153 M IIIL 10,000 div (B10) |
| 9103-D3-5K-30P1* |
590 |
5000 lb |
|
$700.00 |
|
|
|
| 9103 with EZ Mount l |
| 3 mv/v, 0.01% combined, 860/700 ohm, 10 ft 4 cond cable 5K-20K, 30 ft 4 cond cable 30K-60K, stainless steel. NTEP 99-153 M IIIL 10,000 div (B10) |
| 9103-D3-5K w/27925-1* |
589 |
5000 lb |
|
$1270.00 |
|
|
|
| Ball & Socket Beam Mounting Assembly |
| Ball & Socket Mounting assembly for single ended beams with threaded load hole, TSB-SS, NSB-SS, 65023-SS, 9123. The weighing vessel will be on a top mounting plate that has a ball and socket for alignment. The ball and socket has a threaded rod that screws into the load cell. Stainless steel. Add load cell from Beam section. |
| TBSM-4K-SS |
554 |
250-5000SE lb SE=Small envelope 5000lb cap. |
|
$350.00 |
| TBSM-10K-SS |
658 |
5000-10000 lb |
|
$484.00 |
|
|
|
| Beam Mounting Assembly |
| Single ended beams, HBM Model SB3 or RTI Model SSB will mount in this assembly. The load from the hopper fo tank will be transmitted to the bottom of a vertical tension bolt that hangs from the load hole. Spherical washers at top and bottom of tension bolt allow for self alignment of the vessel. Zinc plated steel. Add load cell from Beam section. |
| TM-SC-125-ZP |
556 |
1000 - 5000 lb |
|
$375.00 |
| TM-SC-10-ZP |
667 |
10000 lb |
|
$461.00 |
| TM-SC-20-ZP |
668 |
20000 lb |
|
$590.00 |
| TM-SC-125-SS |
670 |
1000 - 5000 lb |
|
$606.00 |
| TM-SC-10-SS |
671 |
10000 lb |
|
$745.00 |
| TM-SC-40-ZP |
669 |
40000 lb |
|
$1340.00 |
| TM-SC-40-SS |
672 |
40000 lb |
|
$2679.00 |
|
|
|
| EZ Mount I only |
| Welded steel, epoxy painted finish. |
| EZMI-20K |
599 |
5K-20K |
|
$270.00 |
| EZMI-60K |
600 |
30K-60K |
|
$700.00 |
| EZMI-125K |
601 |
100K-125K |
|
$990.00 |
| EZMI-150K |
602 |
150K |
|
$990.00 |
| EZMI-250K |
603 |
200K-250K |
|
$2100.00 |
|
|
|
| EZ Mount II only |
| Mounting assembly is plated steel. |
| EZ Mount II for 5223 |
630 |
50K - 65K |
|
$675.00 |
| EZ Mount II for 5223 |
631 |
100000 lb |
|
$940.00 |
| EZ Mount II for 5223 |
632 |
200000 lb |
|
$2900.00 |
|
|
|
| EZ Mount l only SS |
| Welded steel, stainless steel. |
| EZMI-25K-SS |
591 |
5K - 25K |
|
$570.00 |
| EZMI-75K-SS |
592 |
30K - 75K |
|
$1615.00 |
| EZMI-150K-SS |
593 |
100K - 150K |
|
$1965.00 |
|
|
|
| GDE03 double ended beam only |
| Interchangeable with RTI Model 5103. 3 mv/v, 0.03% nonlineariry, 800/700 ohm, 50 ft 4 cond cable, nickel plated steel, IP67. |
| GDE03-5K |
597 |
5000 lb |
|
$534.00 |
|
|
|
| GDE16 beam only |
| 3 mv/v, 0.05% nonlinearity, 700 ohms, 25 ft 4 cond cable, nikel plated steel, IP67. |
| GDE16-1K |
587 |
1000 lb |
|
$375.00 |
|
|
|
| GDE16 with tank weighing assembly |
| 3 mv/v, 0.05% nonlinearity, 700 ohms, 25 ft 4 cond cable, nickel plated load cell, epoxy painted mount, IP67. |
| GDE16-1K w/TM |
586 |
1000 lb |
|
$615.00 |
|
|
|
| GDE23 beam only |
| Interchangeable with RTI Model 5223. 3 mv/v, 0.03% nonlinearity, 800/700 ohm, 50 ft 4 cond cable, nickel plated steel, IP67. |
| GDE23-20K |
634 |
20000 lb |
|
$534.00 |
|
|
|
| LC32 (STR) beam only |
| Load cell has load button installed. 3 mv/v, 0.05% nonlinearity, 700/700 ohm, 50 ft cable, nickel plated steel. NTEP 92-030 M IIIL 10,000 div. |
| LC32-40K |
615 |
40000 lb |
|
$771.00 |
| LC32-50K |
616 |
50000 lb |
|
$771.00 |
|
|
|
| MM-1 Heavy Cap. Link Mount |
| The MM-1 is designed for use in heavy capacity motor trucks and railroad scales. The unique design allows the platform free movement in all directions and mounts directly to the weighbridge and foundation. The dual link design is self centering and eliminated the need for costly check rods. Applications include axle scales, truck scales, railroad scales, heavy capacity tanks & hoppers. Features: 20,000 lbs to 100,000 lbs. Free movement in all directions. Self-checking movement. Perfect for mechanical conversions. Shock load protection. Thermal expansion & contraction. Double link suspension. Corner leveling bolts. Structural construction: 100% mig welded, safe overload 150%, safe side load 150%. |
| MM-1-50 |
252 |
25K - 50K SE |
|
$760.00 |
|
|
|
| NDE-SS double ended beam only |
| Interchangeable with RTI Model 5103. 3 mv/v, 0.03% nonlinearity, 700/700 ohm, 20 ft 4 cond cable, stainless steel. |
| NDE-20K-SS |
594 |
20000 lb |
|
$750.00 |
|
|
|
| RLC & Weighing Assembly |
| Hermetically sealed stainless steel cell and stainless steel weighing assembly. Ring Torsion load cell. 2 mv/v, 0.02% combined error, 1115/1025 ohms, 3m 4 cond cable 250kg to 1t, 5m 4 cond cable 2t to 10t, stainless steel. |
| 43S-RLC-250kg-D3 |
570 |
250kg |
|
$718.00 |
|
|
|
| RLC load cell only |
| Hermetically sealed stainless steel cell 2 mv/v, 0.02% combined error, 1115/1025 ohms, 3m 4 cond cable 250kg to 1t, 5m 4 cond cable 2t to 10t, stainless steel. NTEP 97-082 III M 5,000 div. |
| RLC-D3-250kg-3MP1 |
571 |
250kg |
|
$480.00 |
|
|
|
| Rod ends |
| Externally threaded rod end with jam nut. |
| 1/4-28 |
217 |
2157 lb. |
1.562"L x 0.375"W x 0.750" diameter |
$9.75 |
|
|
|
| RTM Tank Mount Assembly |
| All stainless steel construction, this tank mount assembly uses a hermetically sealed beam load cell with a blind load hole that has a flat loading surface. Expansion and contraction due to thermal changes and side load from extercal forces are handled with rocker pin mounting. After the side load had been removed the mount will recenter itself using the rocker pin. This mount is unequalled for repeatability. Overload and overlift protection. Integral lateral stops. 2 mv/v, 0.03% combined error, 350/350 ohms, 15 ft 4 cond cable, 30 ft on 10K, stainless steel load cell and mount. |
| RTM-500 |
564 |
500 lb |
|
$812.00 |
| RTM-1.25K |
695 |
1250 lb |
|
$812.00 |
| RTM-2.5K |
696 |
2500 lb |
|
$812.00 |
| RTM-4K |
697 |
4000 lb |
|
$812.00 |
| RTM-5K |
698 |
5000 lb |
|
$875.00 |
| RTM-10K |
| | |
